GainSpan Corporation Apps

The Gainspan Concurrent ProvisioningApplication is used for configurating devices based on GainspanWi-Fi module and/or SoC in concurrent mode.Note:- This application requires a GainSpan module/SoC to workwith.GainSpan WiFi modules can function in concurrent mode. Thismeans the module functions as both a station (connected to a WiFinetwork) and as a Limited AP at the same time.This app allows you to configure the station interface and theLimited AP interface and place the module in concurrent mode.

The Gainspan Provisioning Application is usedfor provisioning and configuration of devices based on GainspanWi-Fi module and/or SoC.Note:- This application requires a GainSpan module/SoC to workwith.Features include* Quickly configure wireless security and network settings* Selection of operating mode* Configuration of Limited AP (Access Point) and Client modes andother system configuration parameters* Connecting to your GainSpan module from within the app or usingQR code* Group Provisioning - which allows you to rapidly connect multipleGainSpan modules to the same network* Verified Provisioning - this connects a module to the homenetwork and verifies that the connection is successful

The GainSpan-NXP Wi-Fi Sensor applicationworks with Gainspan Wi-Fi Adapter board or Wi-Fi module mounted onthe NXP MCU. The application displays the temperature, light andspatial orientation as sensed by the temperature, light andaccelerometer sensors on the NXP MCU and allows user to remotelyturn on and off the LEDs mounted on the MCU. When Android device isrotated to landscape orientation, it graphs the various parametersas they change with time.

This app can be used to update the firmwareover the air on GainSpan modules. It supports GS1011, GS1500 andGS2000 SoCs. Depending on the type of the SoC, the app allowsuploading the appropriate numbers and types of firmwareimages.

The GainSpan Smartplug application worksinconjunction with Gainspan SoC based Smartplugs and displaysvariouspower measurements as obtained from the Power Measurement ICused.It also allows the load to switched on/off. In Chart mode,itgraphs the various parameters as they change with time.GainSpan Smartplug displays the following powermeasurementparameters:* Current* Voltage* Power* Power Factor* Frequency* Cumulative Energy (if the IC supports this feature)In addition, the app allows re-setting the cumulativeenergyvalue to zero.Explanation of permissions required:* Network Access: Required for communicating with theSmartPlugIC* WiFi Allow WiFi Multicast: required for automaticallydiscoveringSmartPlug devices in your network* View Network State, View WiFi State: Used for detectingwhetherWiFi is on and connected to an access point beforeattemptingdiscovery* Connect and disconnectfrom WiFi: Used for turning WiFi On (ifitisn't already on) prior to attempting discovery* Change UI settings: Required to automatically switchbetweenPortrait and Landscape orientations when you switch betweenTabularview and Chart view respectively

The GainSpan TLS application worksinconjunction with Gainspan's EVK and displays values ofthetemperature and light sensor on the board, along with thesignalstrength and battery voltage. It also allows the LED on theboard -if present - to be switched ON/OFF. In Chart mode, it graphsthevarious values as they change with time. This Applicationrequiresan actual hardware device to work with.Explanation of permissions required:* Network Access: Required for communicating with theEVKboard* Allow WiFi Multicast: required for automatically discoveringEVKboards in your network* View Network State, View WiFi State: Used for detectingwhetherWiFi is on and connected to an access point beforeattemptingdiscovery* Connect and disconnectfrom WiFi: Used for turning WiFi On (ifitisn't already on) prior to attempting discovery* Change UI settings: Required to automatically switchbetweenPortrait and Landscape orientations when you switch betweenwidgetview and Chart view respectively